Categories
Property Damage

Will My Property Damage Claim Be Covered by Insurance?

This is the most common question that we get at Lightning Restoration. The truth of the matter is that we wish that we had the Magic 8-Ball that would give us that answer every time, but we don’t.  There are a lot of factors that come into play when a carrier is deciding whether to cover your property damage claim. 

What Factors into My Property Damage Claim?

What is stated in your policy?

This is the most important factor: what coverage did you purchase with your policy?  Insurance policies are more difficult to read than stereo instructions.  If you don’t fully understand your coverages, call your Insurance Agent and request a review.  Know what you are buying and don’t try to save a few bucks by limiting essential coverages, like water damage.

What is the source of the damage? 

You may have $10k in mold coverage, but if that policy doesn’t cover the source of the mold, then it won’t cover the mold.  An example would be ground water intrusion from pooling water on the side of the house.  Standard Homeowners Policies do not cover ground water at all, and Flood Policies will not cover ground water intrusion unless there is storm flooding.  This is defined as when two or more adjacent properties are flooded.  If it is flood water, mold remediation may still not be covered since flood policies typically only pay for the water remediation & repair.

Did you mitigate the damages? 

Every insurance policy requires the policy holder to mitigate the damages. In essence, this means that you have to act to stop the damages from getting worse.  The policy also requires that the loss be “sudden & accidental”. We have found property owners who were aware of water damage to the home for months but failed to act.  Now there is a mold problem and there is an urgency to remediate and file a claim.  However, since they failed to mitigate the water damages, the carrier can deny the claim.  There is an unwritten 14-day rule that is quite common in the state of Florida.  This refers to the situation where the carrier feels like the loss has been going on for more than 2 weeks.  It is not “sudden and accidental” and they will deny the claim. 

Failure to maintain the property

If the property owner is not taking care of general maintenance, the carrier can deny the claim for that very reason.  This is commonly seen in roof leaks, where the roof is past its lifespan. 

Construction or Manufacturer Defects

An insurance carrier can deny a claim if the manufacturer of a structural material, appliance or fixture fails from defect.  This is also the case with a contractor that performs work that causes damages.  However, in most cases, we find that the carrier will go ahead and pay the claim and later subrogate back to that manufacturer or contractor.  Our recommendation is to always attempt to file a claim directly with a manufacturer or contractor before contacting your own insurance carrier.  This will save you from having a claim that will cost you a deductible and possibly increased rates upon renewal. 

  • Most appliance and fixture manufacturers have their own claims department.  Research the manufacturer’s claims department online to get the contact info. 
  • To avoid an ugly confrontation, always request a Certificate of Insurance (COI) from your contractor up front.  You can also request to be added as an Additional Insured to the policy.  When going this route, get that COI before any work begins.  Getting the COI when they want to get the job is easy.  Getting insurance information out of a contractor when damages are in dispute is always a difficult task that often gets very contentious. 

Your Claim Could be Denied for Multiple Reasons

These are a handful of reasons why a carrier could deny your property damage claim.  However, the truth is that each carrier, and each adjuster for that matter, is different and may interpret the policy differently.  By state law, if a claim is denied that you feel should be covered, you do have other recourse.  With each denial, the carrier is required to supply you with the information about how to file for mediation.  The state requires that the carrier pay for the mediation.  It is quite common for carriers to overturn denials in mediation if the policy holder can show a reasonable explanation of expected coverage. 

Lightning Restoration are experts in working with every insurance carrier in the state.  Do not hesitate to contact our office when you have Water, Mold or Fire damage.  We will walk you through the process and get the insurance carrier everything that they need to accurately assess the claim.  If a carrier has denied your claim, we offer discounted services and financing for our clients paying without insurance assistance.

Categories
Water Remediation

The Dos and Don’ts of Home Water Damage Remediation

The goal is to prevent water damage, but accidents occur every day, even when we are being the most careful.  When water damage occurs, it is important to react quickly to stop the damage from getting worse.  Here are some helpful tips when dealing with home water remediation.  Remember that safety comes first.  In addition, if any of these tips put you or your loved ones in harms way, wait for the professionals to arrive. 

The Dos of Home Water Remediation

  • Try to stop the water flow.  Know where the shut-off valves are for your home. 
  • Remove as much excess water as possible with towels or a shop vac.
  • Towel dry wood furniture
  • Relocate all move-able items to a dry place
  • Slide foil or plastic wrap between the furniture and the floor
  • Pin up draperies and upholstery skirts
  • Contact an Expert immediately.  Water damage will continue to get worse, even after you suck up the standing water.  Experts know how to get your property clean and dry, with the least amount of secondary damage…like MOLD

The Don’ts

  • Stay away from contaminated (sewer) water.  Sewer water may contain bacteria, viruses, parasites and other harmful contaminates.
  • Don’t use electrical appliances or outlets in or near wet areas
  • Don’t use your household vacuum to extract water
  • Keep wet items away from any absorbent surfaces
  • Don’t turn on your heating and/or air conditioning system if you think water may have entered the ducts
  • Stay out of rooms if the ceiling is wet or sagging.  Ceiling drywall can contain heavy amounts of water which may collapse on you.
  • Don’t leave absorbent materials like boxes, papers or pillows in the wet area
  • Don’t let children or the elderly enter the affected areas

In short, at Lightning Restoration, we understand the importance of reacting quickly to water damage, for the safety of your family and to prevent Mold from growing. Because of this, we guarantee a 2-hour response time to any emergency call and offer a free evaluation/inspection on every call. 

Categories
Mold Blog Water Remediation

Don’t Get Caught with Short Water and Mold Coverage Limits

Insurance coverages are constantly changing in the State of Florida.  If you are not keeping up with the terms of your policy, you may be in for a rude awakening.  It is especially important to review your renewal policy with your Insurance Agent every year. 

How Much Water and Mold Coverage is Enough?

We recently performed remediation in a home that had water and mold damage throughout half of the home.  The property owner was unaware that, due to the age of their home, they were only insured for $10k in water coverage and $10k in mold coverage.  These amounts may seem like a lot of money to work with in performing the remediation; however, it usually comes up short when needing repairs after the drying and cleaning.  In this case, the cost to replace the kitchen alone was over $20k. 

That left the property owners significantly underinsured.  After speaking with the Agent and Property Owners, we found that they were notified by mail that their policy limits were dropped down but failed to read the letter.  In this case, the property owners were not hurt too bad, as they were saving to do renovations in the home already.  Unfortunately, most are not that lucky, and property catastrophes rarely happen when you are prepared to deal with them. 

Changes in insurance coverages are becoming more and more common in Florida.  Insurance companies originally set limits based on the replacement value of the structure. Now, after a home reaches 30-40 years old, limits drop down to $10k. Lightning Restoration stays on top of the latest trends in the insurance industry to protect our clients from surprises.  When we recognize that a home reaches a certain age, we will contact the local agent to review the policy to make sure that all parties know the limits before performing work that may not be covered. 

Okay, So What Do I Do?

As a homeowner, we recommend that you review your policy every year with your Insurance Agent.  Inquire about your policy limits for different types of damage, including water, mold and fire.  If your insurance carrier has placed low limits on water damage, look at other carriers that will give you full coverage.  Some carriers will reinstate the full coverage with an inspection of the home by a licensed home inspector or plumber.  Also, don’t intentionally buy a policy with lower limits, just to save a small amount of money on premiums…it is rarely worth it.  We witness Murphy’s Law on a regular basis…don’t be one of those cases.  In the end, if you do get caught short on coverage, Lightning Restoration is here to help. 

We have discounted rates for all customers who are paying without insurance assistance.  We also have financing available from 13 different banks, who will have the funds in your account in just 3 days to cover the remediation and repairs.  Our love for our community and neighbors shows through in our ability to educate and help our customers daily.  Remember to call Lightning Restoration in your time of need. 

Categories
Water Remediation

How Washing Machine Hoses Can Cause Damage to Your Home

We recently received a call in the middle of the night for a Florida home that was completely flooded from a washing machine hose that burst. Washing machine hose damage is one of the primary sources of water remediation for our business. There are multiple reasons for this:

  • They are under a tremendous amount of pressure.
  • Washing machine hoses are often squeezed and pinched by the washing machines when they are put in place.
  • The rubber hoses will sometimes have weak spots in them, form bubbles, and eventually burst.
  • Most commonly, when installing the washing machine, the hoses will be over-tightened, which will cause a break in the connection valve.

When a washing machine hose bursts, a tremendous amount of water escapes. In a matter of just a couple of hours, this entire home was flooded with standing water throughout.

So How Do We Fix It?

Thankfully, our crews are experts in handling these situations. They were able to get to work right away, extract all of the standing water, leaving only moisture behind, and then establishing a balanced drying system throughout the home, consisting of dehumidifiers and drying fans.

When it comes to setting up this equipment, too little or too much equipment can hamper the drying efforts. It is important to understand that there is a science behind what we do and calculations for figuring out exactly how much equipment to use. Too much equipment will increase the temperature in the home, which will slow down drying. Too little equipment, and the moisture that’s in the air and in the materials would not get processed quickly enough, again, delaying drying times. The last thing we want is delayed drying times because that is when mold will grow. We expect to have this home dry in three to five days, depending on how quickly some of the materials release the water or moisture.

Can We Prevent Washing Machine Hose Damage?

Some useful tips to avoid this type of water loss:

  • Use steel braided hoses.
  • Check your hoses monthly on the same schedule that you change out your air conditioning filters. Look for cracks or bubbles or weak spots in the hoses.
  • Change your hoses out every four to five years.
  • Do not push the washing machine too close to the wall. Try to keep a four inch gap between the wall and the back of the washing machine. Six inches is ideal, if you have the space.
  • Don’t over-tighten the connector. Hand tighten as much as you can, then with a wrench, a quarter turn will more than suffice. If you do more than that, you take the chance of breaking the connector valve on both sides.

Lightning Restoration Can Fix Any Damage from Washing Machine Hose Damage

Even with all the due diligence and taking all the protective measures, there’s always a chance that accidents may still happen, and you may get a flood. If you do, call Lighting Restoration. We’re available any time and work with every major insurance company in the state of Florida. At Lightning Restoration, our job is to save and salvage your home and your property, so that you can be back to life as normal.